Board caliper
A caliper jaw closes onto a board sample until it seats, and the reading tick settles against the thickness scale.
CSSPremium
Packstructure
15 animationsBoard grade
Single, double and triple wall sections build up in turn while the caliper measure steps out through the grades.
CSSPremiumBox compression
A platen descends onto a cased box, the side walls bow outward under load and the compression bar climbs to its peak.
CSSCrease and fold
A panel hinged on a crease rule swings up through ninety degrees while the angle arc sweeps round with it.
CSSPremiumDieline
The cut contour of a slotted blank holds still while a bright pass travels round its crease rules panel by panel.
CSSPremiumEdge crush
A fluted board coupon stood on edge takes load from a descending platen while the force bar runs out to the edge crush peak.
CSSPremiumFlute profile
A corrugated medium waves between two liners and travels one flute pitch along the board section each cycle.
CSSPremiumGlue flap
A manufacturer's joint flap folds about its crease and lands over the glue lap on the side panel.
CSSPremiumPallet fit
Cases drop onto a pallet footprint one after another until the deck plan is fully tiled.
CSSPremiumPallet overhang
A case creeps out past the pallet deck edge until the unsupported overhang is dimensioned and flagged, then draws back flush.
CSSPremiumPartition
Slotted dividers slide and drop into a case in turn until they seat as a full grid of cells.
CSSPremiumPinwheel pattern
Four cases in a pinwheel layer turn a quarter of a revolution about the deck centre and land back on the pattern.
CSSPremiumStack load
A column of cases takes load from above, settles under it, and the safety margin bar narrows and recovers.
CSSPremiumTuck end
A tuck tongue folds over its crease and drops into the slot to lock the end panel of a folding carton.
CSSPremiumUnfold
The four side panels of a carton net fold up on their creases and lay back flat around the base panel.
CSSPremium